For sale: Modded 1992 Mustang LX 5.0 (Vienna) $8000

reply

x prohibited[?]

Posted: 2015-02-25 8:30pm

◀ prev ▲ next ▶

For sale: Modded 1992 Mustang LX 5.0 – $ 8000 (Vienna)

< >

1992 Ford Mustang paint color : black type : hatchback drive : rwd fuel : gas transmission : manual title status : clean cylinders : 8 cylinders

condition: fair

more ads by this user

  • safety tips
  • prohibited items
  • product recalls
  • avoiding scams

Looking to sell my ’92 LX Mustang. I love the car, but I don’t have the time or money for it anymore. I’ve put lots of time and money into it, but now it just sits. It’s a very solid start to a racing project or with a little extra work, a daily driver.

The car is in good shape for a 23 year old car, but could use some TLC. It was used as a drag car, so the previous owner took out the audio system. Parts are there, but currently not functional. The armrest has been deleted, the ash tray lid works! The headliner fell and is being supported, but I have a replacement that will go with the car.

The modifications:
-Replica ’03 cobra rims, 17″ 4 lug.
-2-1/2″ fiberglass cowl hood w/pins
-Trickflow intake
-65mm throttle body/MAF meter w/cold air intake
-Aluminum Ford Racing heads w/1.6 rockers
-Unknown cam
-24lb injectors
-A/C delete
-Spec stage II clutch
-Tremec T600 transmission
-Aluminum driveshaft
-8.8″ rear, 33 spline axles, 4.10 gears w/spool, c-clip eliminators and long studs, rear end girdle installed
-Lakewood shocks/struts, front is 90/10, rear 50/50
-Unknown drag springs
-Aluminum rear lower control arms
-Nitrous express wet kit is installed but not fully hooked up
-battery is trunk mounted with a safety kill switch beside the license plate
-Gauge faces are white with additional A-pillar gauges
-Windows are tinted 35% all the way around.
-Subframe connectors welded into place, torque boxes reinforced due to drag racing
There may be a few other small things I can’t remember.

The bad:
-Paint is faded on front bumper, rear spoiler/hatch, and roof just above the hatch
-Door lock actuator on driver door is bad
-Pass. door lock trim ring is broken, but lock cylinder still works.
-Headliner is sagging, mentioned above, replacement included with vehicle
-Vehicle is 23 years old, will need normal replacement items such as door/sunroof seals, a good compound wax and clean, carpet cleaned, etc.
-Fender lips are dented from poor attempt at rolling the fenders by a previous owner
-Fuel gauge is a bit off, shows more than is in the tank, I usually fill up at 1/4 tank.

Please email me with any questions, I’m available to show the vehicle during the week after 6pm or most weekends.

  • do NOT contact me with unsolicited services or offers

post id: 4907807432

posted: 2015-02-25 8:30pm

email to friend

best of [?]

Avoid scams, deal locally Beware wiring (e.g. Western Union), cashier checks, money orders, shipping.

  • safety tips
  • prohibited items
  • product recalls
  • avoiding scams

reply

x prohibited[?]

Posted: 2015-02-25 8:30pm

◀ prev ▲ next ▶

For sale: Modded 1992 Mustang LX 5.0 – $ 8000 (Vienna)

< >

1992 Ford Mustang paint color : black type : hatchback drive : rwd fuel : gas transmission : manual title status : clean cylinders : 8 cylinders

condition: fair

more ads by this user

  • safety tips
  • prohibited items
  • product recalls
  • avoiding scams

Looking to sell my ’92 LX Mustang. I love the car, but I don’t have the time or money for it anymore. I’ve put lots of time and money into it, but now it just sits. It’s a very solid start to a racing project or with a little extra work, a daily driver.

The car is in good shape for a 23 year old car, but could use some TLC. It was used as a drag car, so the previous owner took out the audio system. Parts are there, but currently not functional. The armrest has been deleted, the ash tray lid works! The headliner fell and is being supported, but I have a replacement that will go with the car.

The modifications:
-Replica ’03 cobra rims, 17″ 4 lug.
-2-1/2″ fiberglass cowl hood w/pins
-Trickflow intake
-65mm throttle body/MAF meter w/cold air intake
-Aluminum Ford Racing heads w/1.6 rockers
-Unknown cam
-24lb injectors
-A/C delete
-Spec stage II clutch
-Tremec T600 transmission
-Aluminum driveshaft
-8.8″ rear, 33 spline axles, 4.10 gears w/spool, c-clip eliminators and long studs, rear end girdle installed
-Lakewood shocks/struts, front is 90/10, rear 50/50
-Unknown drag springs
-Aluminum rear lower control arms
-Nitrous express wet kit is installed but not fully hooked up
-battery is trunk mounted with a safety kill switch beside the license plate
-Gauge faces are white with additional A-pillar gauges
-Windows are tinted 35% all the way around.
-Subframe connectors welded into place, torque boxes reinforced due to drag racing
There may be a few other small things I can’t remember.

The bad:
-Paint is faded on front bumper, rear spoiler/hatch, and roof just above the hatch
-Door lock actuator on driver door is bad
-Pass. door lock trim ring is broken, but lock cylinder still works.
-Headliner is sagging, mentioned above, replacement included with vehicle
-Vehicle is 23 years old, will need normal replacement items such as door/sunroof seals, a good compound wax and clean, carpet cleaned, etc.
-Fender lips are dented from poor attempt at rolling the fenders by a previous owner
-Fuel gauge is a bit off, shows more than is in the tank, I usually fill up at 1/4 tank.

Please email me with any questions, I’m available to show the vehicle during the week after 6pm or most weekends.

  • do NOT contact me with unsolicited services or offers

post id: 4907807432

posted: 2015-02-25 8:30pm

email to friend

best of [?]

Avoid scams, deal locally Beware wiring (e.g. Western Union), cashier checks, money orders, shipping.

  • safety tips
  • prohibited items
  • product recalls
  • avoiding scams

craigslist washington, DC | cars & trucks search “mustang foxbody|”fox body”|1979|1980|1981|1982|1983|1984|1985|1986|1987|1988|1989|1990|1991|1992|1993″

Comments are closed.