1988 Mustang Notch race car (Krum, TX) $4500

reply

x prohibited[?]

Posted: 2015-02-14 11:32pm

◀ prev ▲ next ▶

1988 Mustang Notch race car – $ 4500 (Krum, TX)

< >

1988 Ford Mustang VIN: NA paint color : red size : mid-size type : coupe drive : rwd fuel : other transmission : automatic title status : clean cylinders : 8 cylinders

condition: fair

  • safety tips
  • prohibited items
  • product recalls
  • avoiding scams

I have come to the conclusion that I will never finish my CP autocross car. My loss is your gain. The car is an 88 notch that had been a CMC road race car in a previous life. I got the car as a roller and built a motor and transmission for it. The motor is sitting in the car but the C4 transmission is not installed. Most if not all of the parts needed are included to get the car on the track or on the road. I just don’t have time or will to put it together. Here are some highlights:

Fresh 302. Less than 1 hour idle time.
14.5 to 1 compression JE pistons
Trick flow stage 2 cam
1.6 roller rockers
Ported Windsor Sr. heads
Edelbrock fuel injection
36 lb injectors
Runs on E85
Gear Drive timing
Moroso oil pan
Main cap girdle
Fresh rebuild C4 transmission. Zero run time
Aluminum driveshaft
Cory Shaw lateral located 8.8 rear end with 3:55 gears
Koni adjustable struts and shocks
5 lug conversion SN95
Chassis is very straight
New edge calipers
Rotors and caliper hangers modified to fit under 15″ wheels.
15×12 Weld wheels all four corners with Hoosier 15″ wide formula car slicks
17×7 aluminum wheels with tires
Autometer gauges
2 MSD 6AL boxes
MSD coil
B&M shifter
Pro Flow Technologies MAF
BBK throttle body
22 gallon fuel cell
255lph fuel pump
Camber plates
2 kirkey racing seats
Moates Quarterhorse fuel injection computer

Other parts that come with it:
Three 302 motors
P-heads
Spare C4
Spare AOD
Spare 4R70W
spare rear 8.8 axle
E303 cam
1.72 roller rockers
Rocker girdle and locks
new pedistals for rockers
BBK 3″ exhaust with flowmasters
Magnaflow mufflers
SN95 aftermarket gauge cluster
SN95 wiring harness and misc parts
5 lug conversion hubs and a-arms (possibly ranger pickup)
PowerTrax locker
Spare camber plates
Spare swaybars
Spare coil springs
Sets of 355, 327, and other gears
boxes full of misc parts

There are several pickup truck loads of parts.

The car is located in Krum, TX.

I might be able to help deliver some of the cars/parts within reason.

  • do NOT contact me with unsolicited services or offers

post id: 4892298959

posted: 2015-02-14 11:32pm

email to friend

best of [?]

Avoid scams, deal locally Beware wiring (e.g. Western Union), cashier checks, money orders, shipping.

  • safety tips
  • prohibited items
  • product recalls
  • avoiding scams

reply

x prohibited[?]

Posted: 2015-02-14 11:32pm

◀ prev ▲ next ▶

1988 Mustang Notch race car – $ 4500 (Krum, TX)

< >

1988 Ford Mustang VIN: NA paint color : red size : mid-size type : coupe drive : rwd fuel : other transmission : automatic title status : clean cylinders : 8 cylinders

condition: fair

  • safety tips
  • prohibited items
  • product recalls
  • avoiding scams

I have come to the conclusion that I will never finish my CP autocross car. My loss is your gain. The car is an 88 notch that had been a CMC road race car in a previous life. I got the car as a roller and built a motor and transmission for it. The motor is sitting in the car but the C4 transmission is not installed. Most if not all of the parts needed are included to get the car on the track or on the road. I just don’t have time or will to put it together. Here are some highlights:

Fresh 302. Less than 1 hour idle time.
14.5 to 1 compression JE pistons
Trick flow stage 2 cam
1.6 roller rockers
Ported Windsor Sr. heads
Edelbrock fuel injection
36 lb injectors
Runs on E85
Gear Drive timing
Moroso oil pan
Main cap girdle
Fresh rebuild C4 transmission. Zero run time
Aluminum driveshaft
Cory Shaw lateral located 8.8 rear end with 3:55 gears
Koni adjustable struts and shocks
5 lug conversion SN95
Chassis is very straight
New edge calipers
Rotors and caliper hangers modified to fit under 15″ wheels.
15×12 Weld wheels all four corners with Hoosier 15″ wide formula car slicks
17×7 aluminum wheels with tires
Autometer gauges
2 MSD 6AL boxes
MSD coil
B&M shifter
Pro Flow Technologies MAF
BBK throttle body
22 gallon fuel cell
255lph fuel pump
Camber plates
2 kirkey racing seats
Moates Quarterhorse fuel injection computer

Other parts that come with it:
Three 302 motors
P-heads
Spare C4
Spare AOD
Spare 4R70W
spare rear 8.8 axle
E303 cam
1.72 roller rockers
Rocker girdle and locks
new pedistals for rockers
BBK 3″ exhaust with flowmasters
Magnaflow mufflers
SN95 aftermarket gauge cluster
SN95 wiring harness and misc parts
5 lug conversion hubs and a-arms (possibly ranger pickup)
PowerTrax locker
Spare camber plates
Spare swaybars
Spare coil springs
Sets of 355, 327, and other gears
boxes full of misc parts

There are several pickup truck loads of parts.

The car is located in Krum, TX.

I might be able to help deliver some of the cars/parts within reason.

  • do NOT contact me with unsolicited services or offers

post id: 4892298959

posted: 2015-02-14 11:32pm

email to friend

best of [?]

Avoid scams, deal locally Beware wiring (e.g. Western Union), cashier checks, money orders, shipping.

  • safety tips
  • prohibited items
  • product recalls
  • avoiding scams

craigslist dallas | cars & trucks search “mustang foxbody|”fox body”|1979|1980|1981|1982|1983|1984|1985|1986|1987|1988|1989|1990|1991|1992|1993″

Comments are closed.